- update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - update kernel-rt version to 6.6.0-53.0.0.5 - update kernel-rt version to 6.6.0-59.0.0.6 - update kernel-rt version to 6.6.0-62.0.0.7 - update kernel-rt version to 6.6.0-79.0.0.8 - update kernel-rt version to 6.6.0-154.0.0.9 - update kernel-rt version to 6.6.0-157.0.0.10 - The RISC-V architecture features have been updated. For more details, refer to the rvck-olk repository. - Updated the RISC-V kernel patch to a4e2472763b2 - Resolving the issue causing patch failure. - !24854 [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - !24846 [sync]ub/ubdevshm: Support for acquiring va is a sub-range of registered va - [sync]urma: fix ubcore_import_jetty_ex not dec vtpn use cnt and create tpid - ub/ubdevshm: Support for acquiring va is a sub-range of registered va - !24823 [sync]urma: use xarray for ubagg/ubcore session lookup - urma: use xarray for ubagg/ubcore session lookup - !24818 [sync]urma: make ratelimit burst configurable for ubcore/uburma/ubagg - urma: make ratelimit burst configurable for ubcore/uburma/ubagg - !24803 [sync]urma: use vzalloc for ubmad tjetty and ini_rtbuffer - urma: use vzalloc for ubmad tjetty and ini_rtbuffer - !24998 ub: udma: Adaptation Flush Done flag - !25046 [sync]urma: fill vtpn param in import jetty - !25045 [sync]urma: add check when RC jetty bind not RC tp_handle - [sync]urma: fill vtpn param in import jetty - !25020 [openEuler-24.03-LTS-SP4] ub: ubase & net: unic: 3 bugfixes - [sync]urma: add check when RC jetty bind not RC tp_handle - net:unic:Fixed the problem of storage device hardware version error - ub:ubase:Fixed the problem of CDMA Entity has not using USC - ub:ubase:Fixed the problem of storage device hardware version error - ub: udma: Adaptation Flush Done flag - !24941 [sync]urma: drop param_set_uint_minmax for ratelimit burst setters - urma: drop param_set_uint_minmax for ratelimit burst setters - The RISC-V architecture features have been updated. - Add basic support for lanxin SoC. - For more details, refer to the rvck-olk repository. - !25652 [sync]urma: add check type in free driver obj - [sync]urma: add check type in free driver obj - !26030 [sync] urma: ratelimit JFC cleanup error logs - !26029 [sync] urma: fix pointer API return value comments - urma: ratelimit JFC cleanup error logs - [sync]urma: fix pointer API return value comments - !26646 mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - mm/numa_remote: limit remote NUMA linear mapping to PMD granularity - !26586 [sync]urma: fix uobj_put race in uobj remove commit - urma: fix uobj_put race in uobj remove commit - !26197 [sync]urma: allow to set priority for urma_ping - urma: allow to set priority for urma_ping - !26170 urma: sync support dev/eid sharing mode - urma: support dev/eid sharing mode - !26825 [openEuler-24.03-LTS-SP4][Hygon]x86/cpu/hygon: fix performance regression for hygon platform - x86/cpu/hygon: fix performance regression for hygon platform - !26660 Fix CVE-2026-64561 - !26667 [sync]urma: reject set_opt when object is already activated - urma: reject set_opt when object is already activated - KVM: x86: Check for invalid/obsolete root *after* making MMU pages available - !27157 urma: fix ubagg topology lookup for primary and port EIDs - urma: fix ubagg topology lookup for primary and port EIDs - urma: enable uburma irq handle threshold by default - !27081 urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: support stable uburma device numbers - urma: fix ipourma to be a proper L3 device and reset skb headers on rx - urma: defer uburma jfce heavy work out of irq top-half to tasklet - urma: prevent JFC event UAF after delete failure - update kernel version to openEuler 6.6.0-59.0.0 - update kernel version to openEuler 6.6.0-66.0.0 - update kernel version to openEuler 6.6.0-68.0.0 - update kernel version to openEuler 6.6.0-72.0.0 - update kernel version to openEuler 6.6.0-75.0.0 - iommu: Hook up '->unmap_pages' driver callback - update kernel version to openEuler 6.6.0-84.0.0 - update Raspberry Pi patch, last commit (f1076a9d7a269d72b6707283560d0d38203cb07a): delete the comment - add sub package: raspberrypi-kernel-headers - fix file erros in raspberrypi-kernel-develchangel - upgrade to 6.6.0-152.0.0 - upgrade to 6.6.0-155.0.0 - upgrade to 6.6.0-159.4.1 - update kernel version to openEuler 6.6.0-59.0.0 - update kernel version to openEuler 6.6.0-66.0.0 - update kernel version to openEuler 6.6.0-68.0.0 - update kernel version to openEuler 6.6.0-72.0.0 - update kernel version to openEuler 6.6.0-75.0.0 - iommu: Hook up '->unmap_pages' driver callback - update kernel version to openEuler 6.6.0-84.0.0 - update Raspberry Pi patch, last commit (f1076a9d7a269d72b6707283560d0d38203cb07a): delete the comment - add sub package: raspberrypi-kernel-headers - fix file erros in raspberrypi-kernel-develchangel - upgrade to 6.6.0-152.0.0 - upgrade to 6.6.0-155.0.0 - upgrade to 6.6.0-159.4.1 - update kernel version to openEuler 6.6.0-59.0.0 - update kernel version to openEuler 6.6.0-66.0.0 - update kernel version to openEuler 6.6.0-68.0.0 - update kernel version to openEuler 6.6.0-72.0.0 - update kernel version to openEuler 6.6.0-75.0.0 - iommu: Hook up '->unmap_pages' driver callback - update kernel version to openEuler 6.6.0-84.0.0 - update Raspberry Pi patch, last commit (f1076a9d7a269d72b6707283560d0d38203cb07a): delete the comment - add sub package: raspberrypi-kernel-headers - fix file erros in raspberrypi-kernel-develchangel - upgrade to 6.6.0-152.0.0 - upgrade to 6.6.0-155.0.0 - upgrade to 6.6.0-159.4.1 - update kernel version to openEuler 6.6.0-59.0.0 - update kernel version to openEuler 6.6.0-66.0.0 - update kernel version to openEuler 6.6.0-68.0.0 - update kernel version to openEuler 6.6.0-72.0.0 - update kernel version to openEuler 6.6.0-75.0.0 - iommu: Hook up '->unmap_pages' driver callback - update kernel version to openEuler 6.6.0-84.0.0 - update Raspberry Pi patch, last commit (f1076a9d7a269d72b6707283560d0d38203cb07a): delete the comment - add sub package: raspberrypi-kernel-headers - fix file erros in raspberrypi-kernel-develchangel - upgrade to 6.6.0-152.0.0 - upgrade to 6.6.0-155.0.0 - upgrade to 6.6.0-159.4.1 - - update Rpi:preempt-RT to openEuler 6.6.0.62.3.0 - - update Rpi:preempt-RT to openEuler 6.6.0.154.4.0 - - update Rpi:preempt-RT to openEuler 6.6.0.62.3.0 - - update Rpi:preempt-RT to openEuler 6.6.0.154.4.0 - - update Rpi:preempt-RT to openEuler 6.6.0.62.3.0 - - update Rpi:preempt-RT to openEuler 6.6.0.154.4.0 - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball - umdk: update cam change cpp operator, cam add adaptation to, ums add UT for, and cam add shmem rdma_basckend_base - umq: update fix get fc_event failed, revert fc sge management, revert qbuf cnt, adaptive send threshold, and add qbuf alloc/free perf - urma: update fix bond jetty shared, git-test, fix typo for CNA, add API fuzz coverage, fix perftest bond_mode balance, and build - umdk: drop stale paths from refreshed tarball - urma: update udma drop blanket -Wno-error, reject out-of-range order_type in, add uboe combination, and change type of bdp_tseg - umdk: update cam Add WQE filling, fix umq test code, fix -p 2 not, module updates, and cam Add static checks - umq: update fix umq thread closure, fix the error in, support jfr lock_free, and change spin lock to - umdk: drop stale paths from refreshed tarball - umdk: update cam Add implementation of, cam Add FP8/FP4 dtype, cam Add integration of, and cam Adapt to shmem - urma: update fix failback second roll, Fix the issue where, fix bonding wr list, and avoid to alloc wr_buffer - umq: update add trace for post, Fix the issue of, fix logic umq credit_clean_up, and add trace timestamp/umq_id - umdk: drop stale paths from refreshed tarball - urma: update docs sync URMA API, docs fix URMA Jetty, docs number segment context, and docs fix delete notifier - umdk: update cam build NDA module, fix umq fost rx, cam fix cann8 5, and ums fix kmod build - umq: update do not allocate credit, avoid fc send eagain, fix the issue where, optimize log, and fix mismatch param type/num - umdk: drop stale paths from refreshed tarball - urma: update udma bugfix related to, make bond CR batch, rename bond topology utility, and fix test case jetty - umq: update fix poll rx core, fix errno and update, fix the umq_ctx error, and add remote eid/jetty_id info - umdk: update cam Update the base and fix - umdk: drop stale paths from refreshed tarball - urma: update return EINVAL for oversize, reorder jetty destruction before, optimize bondp_target_jetty_t memory with, qilin-sp4, preserve perftest final synchronization, and youhua - umq: update add a thread name, fix the issue where, Add without-data buffers to, and add error log for - umdk: update cam accommodate shmem changes, cam fix cam master, cam fix shmem transport, and cam add zero-buffer MoE - urpc: update docs fix documentation drift and docs refine generated documentation - dlock: fix docs fix documentation drift - urma: update move cfg_check from alloc, expand bond imm_data user, share health-check seg at, and shrink wr_list to 256 - umdk: update cam NDA control plane, cam add NDA cq, cam fix layout input, and cam add fp16 datatype - umq: update modify perf accuracy to, control tx outstanding, optimize memory usage when, and when a CQE ACK - umdk: drop stale paths from refreshed tarball - urma: update support bondingEID sharing mode, use is_empty_eid instead of, fix ASAN violations null, and document failback jetty isolation - umdk: update ums update docs add - umq: update fix code format, optimize the log printing, change the initial number, and allocate memory for rx_consumed_jetty_table - urma: update docs fix documentation drift, udma bugfix related to, change the path selection, and allocate bond post buffers - umq: update support bind itself, adapt umq_ub_dev_info_serialize to urma_get/put_seg_ctx, add trace descrition, perftest support share jfr, and Restore bonding port reconfigurability - urma: update fix ub mgmt handshake, allow user to handle, report RNR flow control, and optimize bondp_target_jetty_t memory usage - umq: update optimize umq_t memory usage, add rnr retry errno, support flush jetty node, and add opcode print for - umdk: update cam fix zb normal, fix tp_type parse error, udma delete excess patch, and update test doc - urpc: update fix umq TLS release_thread_cache, fix g_tls_dtors_running flag set, and fix umq codecheck - - umdk: drop stale paths from refreshed tarball